spin coating

Fabrication of polyimide film by spin coating

旋转涂层法制备聚酰亚胺薄膜

互联网摘选

The polymer was coated on the piezocrystal by two methods of solvent evaporation and spin coating.

用溶剂蒸发法和旋涂法将聚合物涂在SAW基片表面。

互联网摘选

This study is mainly the following two parts: 1. ITO films annealed at same annealing time intervals and different annealing temperatures in air by a sol-gel spin coating process.

本文的研究主要有以下两个部分：一、采用溶胶-凝胶旋涂法制备ITO薄膜，并将制得的ITO薄膜在空气中用相同的退火时间间隔和不同的退火温度条件下进行热处理。

互联网摘选

Compared to PLEDs composed of pure polymer or of blend active layers prepared by spin coating and vacuum spray methods, our PLED composed of gradient structure emitted brighter light.

本文中制备的具有梯度结构的聚合物发光器件发出光的强度，比用旋涂法和真空喷雾法所制备的单纯高分子发光器件和混合结构的高分子发光器件更高。

互联网摘选

Analysis of Effect on Uniformity of Photoresist Layer in Spin Coating

离心式涂胶膜厚均匀性的影响因素分析

互联网摘选

ZnO thin films with high c-axis orientation were prepared on polished Si 111 substrates by using spin coating method.

采用sol-gel旋涂法在抛光硅111晶面生长了高度C轴取向的ZnO薄膜。

互联网摘选

ZrO_2 sol was obtained by using hydrothermal synthesis. Thin ZrO_2 films and ZrO_2-PVP composite films were prepared with spin coating method.

采用水热合成技术，制备了ZrO2胶体，用旋涂法镀制了单层ZrO2介质膜以及添加了有机粘合剂PVP的复合ZrO2-PVP薄膜。

互联网摘选

Preparation Process of Aerogel Films for ICF Target by Sol Gel Spin Coating Method

旋转涂膜法制备ICF靶用气凝胶薄膜工艺研究

互联网摘选

The TiO2 film was prepared by daubing P25 powder, dispersing P25 power, sol-gel and spin coating.

分别采用TiO2P25纳米粉体涂膜法，分散TiO2P25粉体法，溶胶凝胶法和旋涂法制备了染料敏化TiO2膜。

互联网摘选

For the vector of centrifugal force change continually in spherical surface spin coating compared to plane, and the characteristic of spherical surface, the spherical surface movement equation was given out based on the plane.

与平面涂胶相比，球面涂胶离心力及重力分量是在不断的变化。根据平面旋涂运动方程及球面面形特征，给出了球面旋涂运动方程；

互联网摘选

In this paper, the cyanine thin films and CD R samples were prepared by the spin coating process.

采用旋涂工艺制备出了大面积的均匀花菁化合物染料薄膜和以其为记录介质的CD-R光盘。

互联网摘选

The spin coating process of PMMA membrane is studied, and the surface-quality problems such as the dissolve among layers, stress crack and lithography crinkle are solved.

研究了PMMA的旋涂成膜工艺，解决了层间互溶、应力开裂、光刻起皱等薄膜表面质量问题；

互联网摘选

Advanced polymer thin films for waveguides were prepared through spin coating.

通过旋涂法制备了用于波导制作的高性能聚合物薄膜。

互联网摘选

We studied the effect of the solution concentration, spin coating condition, and the thermal process ( pre-heated and post-annealed temperature) on the structure of ZnO films.

研究了溶液浓度、旋涂工艺、热处理工艺等工艺参数对ZnO薄膜晶体结构和表面形貌的影响。

互联网摘选

The catalyst films prepared by spin coating and electro-spinning methods are even, uniform and adherent.

旋涂法和静电纺制备的催化剂薄膜均匀平整且牢固性好，可以重复使用。

互联网摘选

ITO films annealed at same annealing temperatures and different annealing time intervals in air by a sol-gel spin coating process.

采用溶胶-凝胶旋涂法制备ITO薄膜，并将制得的ITO薄膜在空气中用相同的退火温度和不同的退火时间间隔下进行热处理。

互联网摘选

After spin coating of the micelles solution on silicon wafers, network structures of P2VP-b-PEO aggregates were obtained.

当把胶束溶液旋涂在硅片基质上，得到了PEO-b-P2VP网状聚集体。

互联网摘选

The nonlinear optical ( NLO) polymer thin films with thickness of 5 μ m on spin coating Glass/ ITO substrates were studied using AFM/ Force curve method and Tapping/ Phase.

应用AFM及力曲线的统计方法（forcecurvemethod）和Tapping/Phase功能，比较系统地研究了Glass/ITO基底上旋涂厚度为5μm的非线性光学功能高分子薄膜。

互联网摘选

So it is possible to prepare films and devices by solution methods such as spin coating or ink jet printing.

该一系列聚合物在普通的有机溶剂里都具有很好的溶解性，可以通过旋涂或喷墨等方法来制备薄膜和器件。

互联网摘选

Tantalum oxide ( Ta_2O_5) thin film photocatalysts were prepared on single crystal Si ( 110) substrates via sol-gel and spin coating methods.

利用溶胶-凝胶法和旋转镀膜法在单晶Si（110）基底上制备了Ta2O5光催化剂薄膜。

互联网摘选

In a word, the structure and performance of the single cell prepared by magnetron sputtering are better than those prepared by slurry spin coating.

相比较而言，磁控溅射法制备的单电池的结构和性能优于浆料旋涂法制备的单电池。

互联网摘选

Thick films with a thickness of 10 μ m on Pd/ Ag electrode alumina substrates also show the characteristic of diffused phase transition by the spin coating technique.

用匀胶法制备的沉积在Pd/Ag电极上的BST厚膜，膜厚约为10μm，也呈现明显的弥散相变特征。

互联网摘选

For the modification of cathode, white polymer light-emitting diodes ( WPLEDs) with bilayer structure were fabricated by spin coating method using different solubility of polymers.

在阴极修饰方面，我们利用聚合物的不同溶解性，研究了用旋涂方法制备双层高分子白光二极管（WPLED）。

互联网摘选

An anode-supported single-chamber solid oxide fuel cell ( SC-SOFC) with dense yttria-stabilized zirconia film as the electrolyte was fabricated by the slurry spin coating technique.

使用浆料旋涂法制备了致密氧化钇稳定的氧化锆电解质薄膜，进而组装成阳极支撑型单气室固体氧化物燃料电池。

互联网摘选

Finally, the effect of spin coating polymer film error to the attenuator was simulated. Three kinds of errors were considered, which were film thickness, waveguides width and angle of Y branch.

最后，考虑了旋涂法成膜及光刻对器件形成造成的宏观误差，模拟了薄膜厚度，波导宽度和Y分支角钝角给器件性能带来的影响。

互联网摘选

A cyanine polymer coating was prepared by spin coating process on pregrooved PC substrate, and its optical storage performance was studied.

用旋涂法制备了一种菁染料-聚合物薄膜，并研究了该染料-聚合物薄膜的光谱性质和光存储性能。

互联网摘选

Evolvement model of photoresist spin coating thickness on spherical surface

球面旋涂光刻胶膜厚分布的数学模型

互联网摘选

Photoluminescence of porous silicon and PS/ PMMA composites was investigated. The result shows that the spin coating method is better relatively.

实验结果表明，用旋涂法实现的PMMA固化后再与多孔硅复合而制得的样品的结果最好，它与原始的多孔硅样品相比，发光峰发生了蓝移而且发光强度下降很小。

互联网摘选

Measured by practical spin coating and experiment, the changing rule reflected by the theoretical results is coincide well with the measuring data.

经实际涂胶测定，该模型反映的变化规律与实际是相符的。

互联网摘选

First sol is prepared, spin coating sol on substrate, then anneal it in 500 ℃ and gain TiO_2 film with anatase structure.

本文先制备溶胶，再用旋涂法在载玻片或多孔硅上旋涂溶胶，然后在500℃下退火得到结合牢固的、锐钛相结构的TiO2薄膜。

互联网摘选